Welcome to the Gundam Forums.
Page 8 of 8 FirstFirst ... 345678
Results 106 to 117 of 117
  1. #106
    Senior Member
    Join Date
    Nov 2015
    Posts
    1,413

    Re: Scorn's Workshop

    the tank looks pretty good!

  2. #107
    Senior Member
    Join Date
    May 2016
    Location
    Cleveland, OH, USA
    Posts
    204

    Re: Scorn's Workshop

    Thanks! It really puts the rest of my collection's lack of weathering in stark contrast lol But I'm pretty happy how they've come out so far.

  3. #108
    Senior Member
    Join Date
    May 2016
    Location
    Cleveland, OH, USA
    Posts
    204

    Re: Scorn's Workshop

    Taking a breather from the tanks, I went back at that Ground Type GM. I've got it fully painted now, but it needs some weathering help. I think part of the problem is it's just got these big, flat, undetailed areas (read: every part of it :P ), so just hitting it with a wash won't help like it did on the tanks. A few people have suggested squad markings, paint chipping, and/or battle damage, and I think that's probably a good step to break up some of the flat.

    Still, I think it's at least a decent improvement from the bare plastic as a start - it's a lot more cohesive as a color scheme, and it'll take weathering a lot better!





    from


  4. #109

  5. #110
    Senior Member
    Join Date
    May 2016
    Location
    Cleveland, OH, USA
    Posts
    204

    Re: Scorn's Workshop

    Ooh, good tip!

    - - - Updated - - -

    Well, I started trying the rain-staining, but so far it's not gone well. While I'm thinking about how to proceed, I'm working on the next piece.



    I'm going for a more muted 0079, it seems, but trying to keep the bluish-green tint. GW's Celestra Grey I think is firttng the bill - it's a little blue next to a very neutral gray.

  6. #111
    Senior Member
    Join Date
    May 2016
    Location
    Cleveland, OH, USA
    Posts
    204

    Re: Scorn's Workshop

    I'm trying out edge highlighting, and I think it's working ok. It's a fine line between visible and too much, though...


  7. #112
    Senior Member
    Join Date
    May 2016
    Location
    Cleveland, OH, USA
    Posts
    204

    Re: Scorn's Workshop

    There we go! I'll call this one a wrap. (Other photos in the completed thread)


  8. #113
    Senior Member
    Join Date
    May 2016
    Location
    Cleveland, OH, USA
    Posts
    204

    Re: Scorn's Workshop

    Found some old kits I've been looking for!


  9. #114
    Senior Member
    Join Date
    May 2016
    Location
    Cleveland, OH, USA
    Posts
    204

    Re: Scorn's Workshop

    More plane work - cockpit glass, and the really, really rough blocking in of the reds. Lots of touch up in my future, but at least it's progress!




    - - - Updated - - -

    I'm blue, da bu dee da bu dai... I'm almost surprised how much definition it brings to the Core fighters. I probably shouldn't be, since it dominates the front end, but I am.



    - - - Updated - - -

    Paint paint paint paint paint paint paint...

    The cockpit frames were a real pain. A few more base colors, then clean up, then shading, then highlighting, and they'll be just about done lol

    I'm thinking about doing unit numbers on the side, but then I feel like I should find more decals...



    - - - Updated - - -

    More air wing progress! All the base colors are blocked in, finally, so it's on to final clean up, shading, and highlighting. The bases have dials to keep track of wounds during games.





    - - - Updated - - -

    I always dread weathering. It's so easy to go overboard, then spend twice the time cleaning up. I usually default to the "clean weathered" look here, but I really screwed up the other one trying a new technique. Still, pretty happy with this one at least lol

    Next, decals. Come on, Bandai, why haven't you released a decal set for a 35 year old 1/144 kit??? Looks like I'll be cutting up about 4 different decal sheets



  10. #115
    Senior Member
    Join Date
    May 2016
    Location
    Cleveland, OH, USA
    Posts
    204

    Re: Scorn's Workshop

    Finally got a game in with all the kits I've been stockpiling lol



    Good times. And now to more projects! While I have to wait for decals for my planes, I'll get to work on a Guntank. Part of my biggest problem with building without spraying has been not being able to prime. It's come out ok, mostly, but I've definitely been hitting these with more coats than I think is seemly :P My FLGS is also my FLHS, so they ordered a few Vallejo surface primers for me. The black is covering better in one pass than the white, although that's true for regular paints as well.



    - - - Updated - - -

    Continuing my foray into brush on primers. As near as I can tell, the black primer is magic and the white is garbage. There's just no other way I can figure it out. The black does 95% great coverage in one slap dash coat, while it takes multiple heavy coats to get anywhere even kind of close with white. Plus it pools pretty bad. So, I tried mixing 1 drop black with 4 drops white to get the gray you can see on the head and soon-to-be-yellow bits. I could have gone half that ratio to end up lighter, but its already hitting spotty coverage, so that's probably the best I can do. Still, everything has a layer, so I get to start actually painting it soon lol



    - - - Updated - - -

    I might be getting a head of myself...


  11. #116
    Senior Member
    Join Date
    Dec 2013
    Location
    Stuck behind a damn desk now, finally off the road!!
    Posts
    3,593

    Re: Scorn's Workshop

    Yes I would have to agree with you about the Vallejo white primer. Even in the AB is kind of sucks. Try the "Grey" it says that it is grey, but it is more white than grey. It kind of threw me off for a second when I first started to use it, it looked so white and I'm used to grey being a dark grey. It works much better.



    List of things to do today. 1. Get a sword. 2. Name it Kindness. 3 Kill people with Kindness.

    My WIP: http://www.gundamforums.com/showthre...816#post274816

    My built stuff:http://www.gundamforums.com/showthre...eys-Big-Garage

    My Blog postings. https://wordpress.com/post/gundammon...rdpress.com/26

  12. #117
    Senior Member
    Join Date
    May 2016
    Location
    Cleveland, OH, USA
    Posts
    204

    Re: Scorn's Workshop

    Ooh, I didn't realize the gray dried that light - off to buy some more! Thanks for the tip

    - - - Updated - - -

    Wheels and vents and guns and such. Really ready for a wash. Probably going for a general darkening wash of all of it, and then a nice dark recess pin wash.



 

Similar Threads

  1. Scorn's Hangar
    By ScornMandark in forum The Ego Zone, aka The Member Model Gallery
    Replies: 14
    Last Post: October 18, 2017, 4:50 PM
  2. Reiger's workshop
    By Cmdr Jesse Reiger in forum Works-In-Progress
    Replies: 50
    Last Post: March 19, 2016, 4:59 AM
  3. Pierate's mediocre workshop
    By Pierate in forum Works-In-Progress
    Replies: 12
    Last Post: February 23, 2016, 1:09 PM
  4. GUNPLA WORKSHOP - Diorama Introduction
    By ommeh in forum Modeling How-To, Tips, and Tricks.
    Replies: 6
    Last Post: July 26, 2015, 3:03 PM
  5. Replies: 0
    Last Post: October 6, 2014, 11:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •