Ok so i went with the wrap and glue idea. I cut the pols down to size then stripped the wire. Then i wrapped it a tightly as i could. Then i started shaping the sprocket the eye mounts on to turn. I first cut the front peg off. Then cut a grove in the front amd one on each side. Then test fit the LED then cut a bit more. Then test fir then cut. Until finally i fit just about where i wanted it to. Then i applied glue on the back of the led. Then on the sides. And now we wait. Im not even gonna look at it until tomorrow. Then tomorrow ill test fit everything. If their isnt soldering involved this isnt really that hard. Ok on to the picture.
![]()